Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCV072 - Europe - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for FLEX NORYL™ Resin WCV072 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
FLEX NORYL™ WCV072 resin is a flexible, non-reinforced extrusion grade of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE) with a Shore D Hardness rating of 72. FLEX NORYL WCV072 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, and good dielectric strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 13 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 5 kg -
ASTM Data
Índice de fluidez, MFI 13.8 g/10min ASTM D 1238
Temperatura 280 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 1750 MPa ISO 527
Esfuerzo de fluencia 44 MPa ISO 527
Alarg. en límite elástico 11 % ISO 527
Resistencia a la tracción 42 MPa ISO 527
Alargamiento a rotura 46 % ISO 527
Modulo de Flexión 1740 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 33 kJ/m² ISO 179/1eA
Res. impacto Izod c/entalla, +23°C, 4mm 36 kJ/m² ISO 180/1A
Res. impacto Izod c/entalla, -30°C, 4mm 6 kJ/m² ISO 180/1A
ASTM Data
Módulo de tracción 1710 MPa ASTM D 638
Esfuerzo de fluencia a tracción 43 MPa ASTM D 638
Esfuerzo de fractura a tracción 41 MPa ASTM D 638
Alargamiento a la fluencia 15 % ASTM D 638
Alargamiento a la rotura 83 % ASTM D 638
Módulo de flexión 1550 MPa ASTM D 790
Resistencia al impacto Izod con entalla, 1/8 in 309 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 67 J/m ASTM D 256
Temperatura -30 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 98 °C ISO 75-1/-2
Temp. reblandecimiento Vicat, B 114 °C ISO 306
Temp. reblandecimiento Vicat, 120°C/h 50N 117 °C ISO 306
ASTM Data
Estabilidad al calor @ 264 psi 92 °C ASTM D 648
Temperatura Vicat 114 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 0.12 % Sim. to ISO 62
Absorción de humedad 0.05 % Sim. to ISO 62
Densidad 1030 kg/m³ ISO 1183
Densidad 1030 kg/m³ ASTM D 792
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Velocidad de giro de husillo 15 - 40 rpm -
Características
Resistencia quimica
Resistencia química general
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.